Home›Industry News›Efinix to Hold Shenzhen Seminar on December 10, Putting 16nm Titanium Series in the Spotlight
← Back to Industry News
Industry

Efinix to Hold Shenzhen Seminar on December 10, Putting 16nm Titanium Series in the Spotlight

IndustryEfinix to HoldShenzhen Seminar onDecember 10, Putting…fpga.love
Illustration

A technical seminar is not news in itself, but by bringing the 16nm Titanium series, the already mass-produced TJ135/TJ375, and the newly launched Ti125 together on its home turf in Shenzhen, Efinix is laying out for engineers the real progress of domestic FPGAs in mid-to-high-end interfaces and low-power small packages.

The Product List on Shenzhen Home Turf

Efinix is scheduled to hold an FPGA technical seminar on December 10 at the JW Marriott Hotel Shenzhen Bao'an, with its core team present. The highlight is the 16nm Titanium series, with logic element counts ranging from 35K to 1000K, officially claimed performance of 300 to 500MHz, and a minimum package size of 3.5mm×3.4mm. The already mass-produced TJ135/TJ375 embed a quad-core hard RISC-V core and integrate hard interfaces including 16Gbps SerDes, PCIe Gen4×4, and 3300Mbps LPDDR4. These configurations point to communications equipment, medical imaging, AI acceleration, and smart NICs, indicating that Efinix is no longer talking only about low-power small logic but is filling out the combination of high-speed interfaces and hard-core processors.

The New Product and Platform Fill In Interfaces and Deployment

The Ti125 is positioned as a cost-effective new product, equipped with richer DSP resources and larger BRAM capacity, and introduces second-generation HSIO for the first time, supporting 1.8G LVDS and 2.5G MIPI soft cores, aimed at throughput and interface expansion for edge devices. The eCNN edge AI platform supports direct deployment of TensorFlow and PyTorch models and provides hardware acceleration for more than 40 types of neural network operators. The SiP solution integrates FPGA and memory into a single package; the official claim is that it reduces the design complexity of peripheral circuits and shortens development cycles. The three lines correspond respectively to interface expansion, model deployment, and board-level integration—all places where engineers actually get stuck during part selection.

EventImpactWatch
Illustration

The Variable Unit Claim Needs On-Site Verification

Efinix's differentiation is built on its self-developed variable unit architecture, in which logic and routing can be converted into each other. The company claims that under equivalent resources the die area is smaller and power consumption lower, with a PPA advantage of up to 4x over traditional FPGAs. The company is headquartered in Qianhai, Shenzhen, and has mass-produced the 40nm Trion series and the 16nm Titanium series, with applications covering machine vision, display, industrial control, medical, automotive, AI, and communications. The PPA multiple is a vendor's own statement; the real question is whether board-level demonstrations and on-site consultations can translate paper specifications into specific projects—which is also the practical value of the seminar's demo sessions and one-on-one consultations.

Three takeaways
  • The 16nm Titanium series covers 35K to 1000K logic elements, officially claimed at 300 to 500MHz
  • TJ135/TJ375 are already mass-produced, with quad-core RISC-V and 16Gbps SerDes
  • Ti125 introduces second-generation HSIO for the first time, filling in interface expansion for edge devices

What it means for us

For engineers in China working on high-speed interfaces and board design, the direct value of this seminar is the ability to confirm in person the actual board-level performance of the Titanium series' SerDes, PCIe Gen4×4, and LPDDR4 hard cores, and whether the Ti125's second-generation HSIO can replace external interface chips. The already mass-produced TJ135/TJ375 means that a single-chip RISC-V plus FPGA solution can enter evaluation lists, but the 4x PPA claim is a vendor statement, and part selection still needs to be based on demonstrations and measured results. If the SiP solution really can simplify peripheral circuits, it would be an indirect benefit for area-sensitive edge boards; toolchain and IP maturity, however, need to be asked about on site and should not be judged solely from a press release.

domestic FPGA16nm Titaniumhigh-speed interfacesRISC-Vedge AI
fpga.love